Dolly Chopper Stopper EC 120
Chopper Stopper® E Model is a unique, patented machine to handle helicopters on pavement. It lets one person quickly load and move a helicopter with ease and unmatched safety for the helicopter.
Unlike transporters you may be familiar with, the CHOPPER SPOTTER loads from the rear. Roll it under the ship and attach the two « yokes » to the wheel attachment points.
Easy to load from the rear
Take the remote control in hand, step back to the tail, and press UP. The helicopter balances just as if it were on its regular wheels. Press FWD (or REV) on the hand held control, and the « soft start » electronic speed control gently moves the ship at any selected speed, up to 3 feet per second.
The hand-held control regulates speed, direction, and raises and lowers the ship. The electronic controls offer dynamic braking.
E MODEL SPECIFICATIONS
Capacity: 4,500 lb (2,075kg)
Motor: 1 hp DC PM Motor
APU (28 v. nom): Optional
Batteries: 2 Optima AGM Red Top
Battery Charger: 24 v. 6 amp on-board
Swivel Wheels: Heavy duty single wheel
Drive Wheel: 4″ x 8″ (10cm x 20cm)
Shipping Weight: 700 lb (318 kg)
Shipping Dimensions: 69″ x 43″ x 17″ ( 175 x 110 x 43 cm)
Hydraulics: Manual override for down
Lifting System: Hydraulic/Electric
Brakes: Electronic, variable
Control Cable: 28ft. (8.5m)/Neopren
Overload Protection: Circuit Breaker 100amp (auto reset)
Speed Control: Variable to 3ft./sec ( 1 m/second)
Color: Safety Yellow
Transmission: Chain Drive
Duty Cycle: 3-4 hours continuous duty between charges at least
Voltage: 115 or 230 volts (50mhz or 60mhz)
Battery Gauge: Digital